DIY bath towel and terry mitten for the baby

Send

A large and soft towel "terry frog" will make sure that your precious child is dry and warm after bathing. A terry mitten will give comfort during water procedures.

Pattern

The format of the pattern is A4; all dimensions in the drawing are in centimeters

You will need:

green and white terry cloth;
black cotton fabric;
flizofiks;
slanting inlay;
green, white and black sewing threads;
tailor pins;
scissors;
filler;
hand needle for sewing.

Step 1

To carve out: the main part (round corners) 1x and the hood part 1x; 2x green and white terry cloth eye; black cotton pupils and nostrils of 2x each.

Step 2

Cut out pupils from black cotton fabric, previously duplicated by flizofiksom. Iron to the details of the eyes of a white terry cloth and sew on a dense zigzag stitch.

Step 3

Fold the white and green details of each eye with the front sides, grind in a circle, leaving a small area open for sewing in the seam. Cut the seam allowances to a width of 2 mm. Turn the eye out, fill it with filler and sew in manually.

Step 4

Turn the longitudinal (lower) section of the hood part with an oblique trim.Pin the hood to the main part and stitch it at a distance of 5 mm. Cut the slices with an oblique trim around the entire perimeter. Sew both eyes to the hood manually.

How to sew an oblique edging: 3 ways

You will need:

green and white terry cloth;
black cotton fabric;
flizofiks;
shtkfliz;
filler;
green, white and black sewing threads;
slanting inlay;
self-disappearing marker;
hand needle for sewing;
scissors;
tailor pins.

Step 1

To carve: mitten from green terry cloth 2x; 2x green and white terry eye; black cotton pupil 2x.

Step 2

The pupils and eyes perform as described in step 2 for a green towel. Draw a smile with a self-disappearing marker, having pre-ironed the shtkfliz from the wrong side, and lay a dense zigzag line along the line from the front side.

Step 3

Rounded sections of the details of the mitten grind on the overlock. Turn the gauntlet out. Manually sew eyes.

Step 4

For the eyelet, fold the oblique trim in half, iron and sew lines on both sides for a length of approx. 10 cm. Bend the lower cut of the mitten with an oblique trim, securing the eyelet.